INGERSOLL RAND 1/4" 1650RPM INLINE PUSH START AIR SCREWDRIVER
Pre Order Today
Item Number
1RPMC1
Inline air-powered screwdrivers align the bit-holding chuck with the tool body to allow fastening in recesses and tight spaces. They also keep the user's forearm in line with the bit to minimize fatigue and allow maximum pressure and control when driving screws into vertical and horizontal surfaces at waist level. They have a lever switch that is pressed with multiple fingers (rather than with a single finger like a trigger throttle) to reduce hand fatigue during extended use.
Specifications
- Power Source Air-Powered
- Torque Range 4.4 in-lb to 20.4 in-lb
- Max. Torque 20.4 in-lb
- Min. Torque 4.4 in-lb
- Free Speed 1,650 RPM
- Drive Size 1/8 in
- Hex Bit 1/4 in Quick Change
- Clutch Type Adjustable Cushion
- Clutch Setting Location Internal
- Application All Fastening Jobs
- Duty Rating Industrial Duty
- Reversible Yes
- Variable Speed Yes
- Number of Speed Settings 1
- Side to Center 0.6 in
- Air Pressure 90 psi
- Air Consumption 13 cfm
- Air Inlet 1/8 in NPT
- Min. Hose Size 1/4 in
- Exhaust Location Rear
- Noise Level 73 dB
- Vibration Level 2.5 m/sq sec
- Handle Type Inline
- Handle Material Aluminum
- Housing Material Aluminum
- Throttle Type Push to Start
- Tool Weight 1.1 lb
- Overall Height 2-5/8 in
- Overall Length 8-3/4 in
- Overall Width 1-5/8 in
- Includes Extra Clutch Springs
| Item Number | 1RPMC1 |
|---|---|
| Weight | 30.000000 |
Write Your Own Review