SAWSTOP PROFESSIONAL CABINET SAW 3HP 230V 60HZ W/ 30" PREMIUM FENCE SYSTEM

Features

• 30-INCH T-GLIDE FENCE ASSEMBLY: The 30-inch T-Glide Fence & Rail are made of heavy-gauge steel for sure lockdown and reliably square cutting for years without deflection.
• UNMATCHED QUALITY: The trunnion and arbor are built for precision, strength and stability. The gas piston elevation delivers smooth and easy adjustability. Table flatness is measured diagonally at 0. 010” maximum gap.
• DUST COLLECTION: 99% dust collection is delivered above the table with the included dust collection blade guard, and below the table with advanced shrouding around the blade. Available Overarm Dust Collection (Model # TSA-ODC, sold separately) routes dust away from the blade and into the 4” port.
• SAWSTOP PATENTED SAFETY SYSTEM: Stops a spinning blade on contact with skin. The blade stops in less than 5 milliseconds, and drops below the table, minimizing a potentially life-altering injury to a mere scratch.
• RELIABILITY: The Control Box houses the on-off switch, power paddle, and on-board computer, and constantly checks that all systems are working to reliably keep you safe.
• 3HP MOTOR: The 3HP motor gives you the extra power you need to quickly rip most materials you come across

Specifications

• 30" Rip Capacity: PCS175 or PCS31230 -PFA30: 30" Premium Fence Assembly
• Motor Option(s) (60Hz TEFC): 1.75 or 3 HP available
• Overall saw dimensions 30 in: 61 3/4" W x 31 1/8" D x 34" H
• Motor Configuration 2 PCS31230: 3 HP, 1 phase, 230v, 13 A, Plug: NEMA 6-15P w/9’ cord
• Saw body footprint: 19 3/8" W x 19 3/8" D (Cabinet)
• Cast iron table: 20" W x 27" D
• Extension wings: 12" W x 27" D each
• Cast iron table (w/ extension wings): 44" W x 27" D
• Extension table 30 in: 12" W x 27" D
• Shipping weights - w/ 30 in fence systems: 455 lbs / (2 Boxes)
• Shipping dimensions (saw body only): 42”W x 31”D x 30”H
• Shipping weight (approx.): (table saw only) 400 lbs
• Assembled weights - w/ 30 in fence systems: 380 lbs
• Weights - table saw only: 335 lbs
• Blade: 40-tooth, prof. grade, 5/8" arbor
• Blade diameter: 10"
• Blade tilt: Left
• Blade kerf: 0.118" (3mm)
• Blade plate thickness: 0.078" (2mm)
• Max. depth of cut, blade at 0º: 3 1/8"
• Max. depth of cut, blade at 45º: 2 1/4"
• Max. rip, right of blade - 30 in: 30" (w/ 30" rails)
• Max. rip, left of blade: 12"
• Dado diameter: 8" (requires dado brake cartridge & insert)
• Dado max. width: 29/32”
• Arbor diameter at blade: 5/8"
• Main bearing size: 62mm OD x 30mm ID
• Second bearing size: 52mm OD x 25mm ID
• Table in front of blade (max. elevation): 10 1/4"
• Table behind blade (max. elevation): 7 1/2"
• Arbor Runout: 0.001" Maximum allowable runout
• Table flatness measured diagonally: 0.010" Maximum gap
• Blade alignment with miter slot: 0.010" Maximum displacement
• Deviation of miter gauge indexing stops from actual: ±0.25º
• Alignment between splitter and blade: 0.010" Maximum difference
• Miter slots T-shaped: 3/4" at top, 1" at bottom, 3/8" deep
• Miter slots center: 11 1/8" center-to-center
• Miter slots info: 5 1/2" (arbor flange to center of right slot)
• Dust collection port diameter: 4"
• Riving knife / splitter thickness: 0.090" (2.3 mm)
• Dust collection blade guard (standard on 3 HP saws) polycarbonate, extends 1-3/16" right of blade
• Blade guard: (dust collection) port diameter 1-1/2" Outside, 1-1/4" Inside
• Insert: zero clearance, phenolic core, melamine surfaces
• Hand wheels: 7" diameter, cast iron w/ chrome handle
• Belts: 2 V-ribbed belts - arbor b. static dissipative