Ridgid K-50-8 100' Corded Drain Cleaning Machine Kit
The RIDGID® K-50 Sectional Machine serves as a general-purpose drain machine. It works with pipes measuring 1-1/4 to 4 inches in diameter. This unit handles three different styles of cable. It accepts those measuring 5/16 inch, 3/8 inch and 5/8 inch. This Ridgid sectional machine runs cables automatically. A side-mounted handle starts the system and runs cables at a speed of 400 RPM. This system depends on an 115V motor to sustain performance for as long as you need it to run. When you release the handle, the cable system stops. You can select forward, reverse and off positions using the on-board toggle switch and use the included cable for several types of drainage systems. This Ridgid drain machine achieved approval for CSA and UL Standards. It comes with an auger, a cable kit and adapters.
Specifications:
- 3/4" to 4" (20-110 mm) Drain Lines
- Uses sections of 5/8” (16 mm) cable, cleans 1 ¼” to 4” (32-110 mm) lines up to 100 feet.
- C-8 best for 1 1/4” to 3” (32 mm to 75 mm) drains.
- C-9 best for 2” to 4” (50 mm to 102 mm) drains.
- Equipped with an A-17 adapter for runs up to 50’ (15 m) of 5/16” (8 mm) cable or, 35’ (11 m) of 3/8” (10 mm) continuous length cable.
- 5/16” (8 mm) best for ¾” (20 mm) to 1 ½” (40 mm) lines.
- 3/8” (10 mm) best for 1 ¼” (32 mm) to 2” (50 mm) lines.
Features:
- Unique, easy-to-use, instant-acting cable clutch maximizes operator control:
- Pull handle down and cable spins at 400 RPM.
- Release handle, cable stops – instantly.
- Uses sections of 5/8" cable, cleans 1-1/4" to 4" lines up to 100 feet.
- C-8 best for 1-1/4" - 3" drains
- C-9 best for 2" - 4" drains
- Equipped with 1/6 HP motor; 115V Models CSA approved
Includes:
- K-50 Sectional Machine
- A-30 Cable Kit
- A-17-A Adapter
- A-17-B Adapter
| Item Number | 59000 |
|---|---|
| Weight | 82.000000 |
| Vendor Part Number | 59000 |